[Jan 25, 2022] Cisco 350-501 Real Exam Questions and Answers FREE
Pass Cisco 350-501 Exam Info and Free Practice Test
Career Bonuses
Obtaining the CCIE Service Provider or CCNP Service Provider certifications will allow you to take a prestigious position with a decent salary. Thus, the certified professionals can choose between various job roles, including a CCIE Trainer, a Customer Success Specialist, a Network Administrator, a Hardware & Network Technician, a Subject Matter Expert, a SCADA Network Specialist, and a Network Engineer among others. As for the average salary, you can expect to earn about $100,000-$160,000 per year. The amount of income will depend on your title, working experience, and related tasks.
Networking: 20%
- Implementing the Open Shortest Path First protocol (v3 & v2);
- Implementing high availability.
- Implementing the Intermediate System to Intermediate System protocol (IPv6 & IPv4);
- Describing IPv6 transition (NAT64, NAT44, 6RD, DS Lite, and MAP);
- Troubleshooting the routing protocols such as neighbor adjacency and route advertisement (OSPF, BGP & IS-IS);
- Implementing Border Gateway Protocol (v6 and v4 for EBGP & IBGP);
- Implementing the routing policy language and route maps of Border Gateway Protocol (BGP), Intermediate System to Intermediate System protocol (IS-IS), and Open Shortest Path First protocol (OSPF);
NEW QUESTION 25
A customer of an ISP requests support to preferred exit points for the customer AS?
- A. highest local preference outbound
- B. lowest multi-exit discriminator
- C. highest local preference inbound
- D. lowest local preference inbound
Answer: C
NEW QUESTION 26
What is the role of NSO in network automation?
- A. It is GUI used to manage wireless devices in a campus infrastructure.
- B. It Is a type of REST API used to configure an APIC.
- C. It is a tool used to bridge automation to the physical network infrastructure.
- D. It Is a tool that uses CLl only to configure virtual network devices.
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/network-services-orchestrator/dat
NEW QUESTION 27
After a possible security breach, the network administrator of an ISP must verify the times that several different users logged into the network. Which command must the administrator enter to display the login time of each user that activated a session?
- A. show netconf-yang sessions detail
- B. show netconf-yang sessions
- C. show netconf-yang datastores
- D. show platform software yang-management process
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/167/b_167_programmability_cg/configuri
NEW QUESTION 28
Refer to the exhibit:
A network engineer is implementing QoS services. Which two statements about the QoS-group keyword on Cisco IOS XR 3re true? (Choose two )
- A. It marks packets for end to end QoS pokey enforcement across the network
- B. It cannot be used with priority traffic class
- C. QoS group can be used in fabric QoS policy as a match criteria
- D. QoS group marking occurs on the ingress
- E. The QoS group numbering corresponds to priority level
Answer: B,C
NEW QUESTION 29
Refer to the exhibit.
An engineer is configuring multitiopology IS-IS for IPv6 on router R1. Which additional configuration must be applied to complete the task?
A)
B)
C)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: A
NEW QUESTION 30
Refer to the exhibit:
This output is included at the end of an output that was provided by a device using NETCONF.
What does the code show?
- A. It shows that the running configuration is blank
- B. It shows that the full configuration is being modeled by VANG
- C. It shows NETCONF uses remote procedure calls.
- D. It shows the hostname of the device as rpc-reply
Answer: A
NEW QUESTION 31
Refer to the exhibit:
Which statement about the neighbor statements for 192.168.1.1 is true?
- A. The neighbor router receives at least four labels from this router
- B. The router sends BGP labels for its prefixes to this peer
- C. The router sends only a label for the prefix for LoopbackO.
- D. The router must have TDP configured for the send-label command to operate
Answer: B
NEW QUESTION 32
What is the function of the FEC filed within the OTN signal structure?
- A. It allows deep inspection of data payload fields.
- B. It allows source nodes to discard payload errors before transmitting data on the network.
- C. It allows receivers to correct errors upon data arrival.
- D. It allows the sending devices to apply QoS within the OTN forwarding structure.
Answer: C
NEW QUESTION 33
Drag and drop the functionalities from the left onto the correct target fields on the right.
Answer:
Explanation:
NEW QUESTION 34
Refer to the exhibit:
Which statement about the status of the neighbor relationship between R1 and R2 is true?
- A. The neighbor relationship is down because R2 is operating as a Level 1 router and the two routers are in different area
- B. The neighbor relationship is down because the two routers are in the same subnet.
- C. The neighbor relationship is down because the two routers are configured with different area types
- D. The neighbor relationship is up because R2 is level 1 and level 2 router.
Answer: B
NEW QUESTION 35
Refer To the exhibit.
Which BGP attribute should be manipulated to have CE1 use PE1 as the primary path to the Internet?
- A. The weight attribute should be manipulated on PE1 on outbound routes advertised to CE1.
- B. The origin of all routes should be modified on each router on inbound and outbound routes advertised to CE1.
- C. The local preference attribute should be manipulated on PE2 on inbound routes advertised to CE1.
- D. The MED should be manipulated on CE1 on inbound routes from PE1.
Answer: B
NEW QUESTION 36
A customer of an ISP requests support to setup a BGP routing policy. Which BGP attribute should be configured to choose specific BGP speakers as preferred exit points for the customer AS?
- A. lowest multi-exit discriminator
- B. lowest local preference inbound
- C. highest local preference inbound
- D. highest local preference outbound
Answer: D
NEW QUESTION 37 
Refer to the exhibit. A network operator working for service provider with an employee id: 1234:56:789 applied this configuration to a router.
Which additional step should the engineer use to enable LDP?
- A. Configure the both keyword to enable LDP globally.
- B. Enable MPLS LDP on the interface.
- C. Delete the static router ID.
- D. Disable Cisco Express Forwarding globally.
Answer: B
Explanation:
Section: MPLS and Segment Routing
Explanation/Reference:
NEW QUESTION 38 
Refer to the exhibit. R101 is peering with R102 and R103, and R201 is peering with R202 and R203 using iBGP Labeled Unicast address families. The OSPF area 0 border routers are in a full iBGP Labeled Unicast mesh, and VPNv4 routes are exchanged directly between PE routers R101 and R201 through iBGP. Which address family-level configuration must be applied on ABR R102 on ABR R102 to support a Unified MPLS routing architecture with partitioned IGP domains?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
Section: Services
NEW QUESTION 39
Refer to the exhibit:
A network administrator wants to enhance the security for SNMP for this configuration.
Which action can the network administrator implement?
- A. Re-configure to use SNMPv3.
- B. Add a community string to the existing entry
- C. Maintain the configuration but switch to an encrypted password for device access through SSH
- D. Re-configure to use SNMPv2 with MD5 authentication
Answer: A
NEW QUESTION 40
Which configuration modifies Local Packet Transport Services hardware policies?
A)
B)
C)
D)
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: A
NEW QUESTION 41
You are creating new Cisco MPLS TE tunnels. Which type of RSVP message does the headend router send to reserve bandwidth on the path to the tunnel's router?
- A. error
- B. tear
- C. reservation
- D. path
Answer: C
NEW QUESTION 42
What are two characteristics of MPLS TE tunnels? (Choose two.)
- A. The headend and tailend routers of the tunnel must have a BGP relationship
- B. They require EIGRP to be running in the core
- C. They use RSVP to provide bandwidth for the tunnel
- D. They are unidirectional
- E. They are run over Ethernet cores only
Answer: C,D
Explanation:
Section: MPLS and Segment Routing
Explanation/Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_te_path_setup/configuration/xe-3s/mp-te-path-setup-xe-
3s-book/mp-te-auto-bandwdth.html
https://www.ciscopress.com/articles/article.asp?p=426640&seqNum=2
NEW QUESTION 43
Drag and drop the functionalities from the left onto the target fields on the right.
Answer:
Explanation:
NEW QUESTION 44
Refer to the exhibit:
An engineer is preparing to implement data plane security configuration.
Which statement about this configuration is true?
- A. Router 2 must configure a route to null 0 for network 192 168.1 0/24 for the RTBH implementation to be complete.
- B. Router 1 must be configured with uRPF for the RTBH implementation to be effective.
- C. Router 1 is the trigger router in a RTBH implementation.
- D. Router 2 is the router receiving the DDoS attack
Answer: C
NEW QUESTION 45
Refer to the exhibit.
Which the link aggregation configuration router is running on Cisco IOS XR software, which LACP interface configuration is needed to add the interface to the bundle?
A)
B)
C)
D)
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: A
NEW QUESTION 46 
Refer to the exhibit. Based on the show command output, which result is true after BGP session is established?
- A. No routes are accepted from the neighbor 192.168.2.2, nor are any routes advertised to it.
- B. The IOS XR router advertises all routes to the neighbor 192.168.2.2, but it does not accept any routes from
192.168.2.2. - C. The IOS XR router does not advertises any routes to the neighbor 192.168.2.2, but it accepts any routes from 192.168.2.2.
- D. The IOS XR router advertises and accepts all routes to and from eBGP neighbor 192.168.2.2.
Answer: A
Explanation:
Section: Networking
NEW QUESTION 47
After a possible security breach, the network administrator of an ISP must verify the times that several different users logged into the network. Which command must the administrator enter to display the login time of each user that activated a session?
- A. show netconf-yang sessions detail
- B. show netconf-yang sessions
- C. show netconf-yang datastores
- D. show platform software yang-management process
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/167/b_167_programmability_cg/configuring_yang_datamodel.html
NEW QUESTION 48
......
Topics Tested in the Cisco 350-501 Exam
The Cisco 350-501 exam focuses on five major topics and requires the candidates to demonstrate the following skills:
- Configuring different software related to assurance and automation as well as understanding what is the role that the NSO architecture has for the organization’s systems.
- Describing and configuring the VPN services alongside implementing different multicast and QoS solutions;
- Gaining expertise in implementing the MPLS infrastructure together with describing segment routing and traffic engineering;
- Implementing different networking technologies such as the IPv6 and IPv4, BPP, or OSPF;
- Describing the service provider virtualization and architecture as well as knowing how to work with the Cisco network software architecture;
Latest 350-501 Exam Dumps Cisco Exam: https://pass4sure.test4cram.com/350-501_real-exam-dumps.html