Best Quality 1z0-1045-22 Exam Questions Oracle Test To Gain Brilliante Result!
Preparations of 1z0-1045-22 Exam 2022 Oracle Warehouse Management Cloud Unlimited 72 Questions
Oracle 1z0-1045-22 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
NEW QUESTION 23
You are using the WMS Cloud at the Stores as well as the DC. Your workflow at that Store requires that you quickly pick orders for the customer when they arrive.
Which configuration allows you to achieve this workflow requirement?
- A. Change the Order Type to "Rush" and wave it because the customer is waiting.
- B. Create an Order Type with the flag "Allocate during Pick" enabled so that you can pick orders at the store without waving.
- C. Create a wave template with Wave Template Type "Store", then wave will allocate orders in a FiFO
- D. Create a Flow Through process and configure each customer's address as a "Designation Location"
- E. Set the Order Type to "Pick Without Wave". This allows the RF options to automatically pick up those order and display to pickers.
Answer: B
NEW QUESTION 24
Which two data conditions on the Outbound Order will always result in unsuccessful cross-dock allocations in WMS Cloud? (Choose two.)
- A. The item on the Outbound Order is a batch tracked item.
- B. The item on the Outbound Order does not match the item on the LPN being received.
- C. The quantity of the item on the Outbound Order is exactly equal to the quantity of the item on the LPN being received.
- D. The quantity of the item on the Outbound Order is greater than the quantity of the item on the LPN being received.
- E. The quantity of the item on the Outbound Order is less than the quantity of the item on the LPM being received.
Answer: B,E
NEW QUESTION 25
You are performing the Split IB LPNs RF transaction and seeing an error message: Shipment Verification status mismatch.
Which three are valid? (Choose three.)
- A. The from-IBLPN and the to-IBLPN might be received against the same ASN.
- B. This error message will disappear if the RF screen parameter required-validations is set up as No Validation.
- C. If the to-IBLPN is received via the Recv Shipment RF transaction, the from-IBLPN might be from the Create RF transaction.
- D. This error message will disappear if the RF screen parameter split-uom is left bank.
- E. The from-IBLPN and the to-IBLPN might be received against two different ASNs respectively.
Answer: B,C,E
NEW QUESTION 26
Your company is a manufacturing company using a legacy system to define and maintain their Item Master.
On a daily basis, your company updates and defines new items in the legacy system, which is integrated with Oracle WMS Cloud. You are an Inventory Super User.
Which option will you use to automatically update the Item Master of Oracle WMS Cloud daily from the legacy system?
- A. Using the host system to drop the ITMR file into the shared SFTP directory
- B. Manually downloading Item Master file from ERP and uploading it to Oracle WMS Cloud
- C. Creating New Item manually on the Items screen of Oracle WMS Cloud
- D. Manually uploading ITMR file using the Input Interfaces screen
Answer: A
NEW QUESTION 27
Your customer wants to Putaway LPN to Location by using the Putaway Rules and link the location with the Replenishment Zone.
Which four configurations are required? (Choose four.)
- A. Set Replenishment Zone for Reserve Location.
- B. Set Criteria for Putaway Rules.
- C. Set the Location Size Type at Facility Level.
- D. Set Replenishment Zone for Active Location.
- E. Putaway Priority and Rules are set at Facility Level.
- F. Putaway Type is set at Facility Level.
Answer: C,D,E,F
NEW QUESTION 28
You are using the WMS Cloud at the Stores as well as the DC. Your workflow at that Store requires that you quickly pick orders for the customer when they arrive.
Which configuration allows you to achieve this workflow requirement?
- A. Change the Order Type to "Rush" and wave it because the customer is waiting.
- B. Create an Order Type with the flag "Allocate during Pick" enabled so that you can pick orders at the store without waving.
- C. Create a wave template with Wave Template Type "Store", then wave will allocate orders in a FiFO
- D. Create a Flow Through process and configure each customer's address as a "Designation Location"
- E. Set the Order Type to "Pick Without Wave". This allows the RF options to automatically pick up those order and display to pickers.
Answer: B
Explanation:
sequence.
NEW QUESTION 29
Your customer wants to receive an IB shipment and capture pallet weight at the time of receiving.
Which parameter must be set in the Receiving RF screen to meet this requirement?
- A. Set Single-Sku-management as Assume Single SKU.
- B. Set Blind-License Plate Number-receive-mode as by SKU scan.
- C. Set Mode as Blind-ASN Receiving.
- D. Set Capture-catch-weight as "Prompt for catch wt".
- E. Set rch-sku-not-on-shmnt to "Promt for catch wt".
Answer: C
NEW QUESTION 30
Identify the export type that is not supported in an Express Report.
- A. PowerPoint
- B. RTF
- C. CSV
- D. PDF
- E. Excel
Answer: A
NEW QUESTION 31
A user is using the PackNC transaction to pack into a blind OBLPN. The user needs to pick up 10 units for Item 000234, but after picking up four units the OBLPN is full.
What should the user do?
- A. end the LPN
- B. move to the next location
- C. scan the next order
- D. short the remaining units
Answer: A
NEW QUESTION 32
A client can integrate with WMS Cloud by using the input interface.
Which three options can be integrated? (Choose three.)
- A. Loads
- B. Appointments
- C. Orders
- D. Item
Answer: B,C,D
NEW QUESTION 33
Which five combinations of lot and expiry date are valid scenarios in WMS Cloud? (Choose five.)
- A. Two IB LPNs of the same item have the same lot and the same expiry date.
- B. Two IB LPNs of the same item have different lots and the same expiry dates.
- C. Two IB LPNs of the same item have different lots and different expiry dates.
- D. The IB LPNs have an item with the same lot and different expiry dates.
- E. An item is lot-tracked but not expiry-date-tracked.
- F. An item is expiry-date-tracked but not lot-tracked.
Answer: A,C,D,E,F
NEW QUESTION 34
Select two true statements about Group Configuration. (Choose two.)
- A. Users can assign specific access to activities by using Group permissions
- B. Permissions come already pre-assigned to standard Groups in the system and cannot be changed
- C. Only the RF Menu uses the concept of Groups
- D. User can belong to multiple Groups
- E. Users must log out when switching Groups
Answer: A,D
NEW QUESTION 35
Select two configurations required to fulfill a Cross Dock order. (Choose two.)
- A. The Replenishment template is required to replenish Cross Dock Order
- B. Module Parameter should be enabled on the RF Receive Screen for receiving Cross Dock ASN
- C. Wave template should be configured to allocate Cross Dock Order
- D. IB Shipment Type should be defined for Cross Dock ASN
- E. The Cross Dock Outbound Order type should be defined
Answer: A,D
NEW QUESTION 36
Select the two data formats supported by Oracle WMS Cloud with its built-in interfaces and APIs. (Choose two.)
- A. EDI
- B. XML
- C. JSON
- D. pdf
- E. Delimited Flat File
Answer: B,E
NEW QUESTION 37
Which three interface validations cause the Advance Shipment Notifications (ASN) to fail when uploading to WMS Cloud? (Choose three.)
- A. ASN Qty and Purchase Qty do not match in WMS Cloud.
- B. ASN file has invalid data format.
- C. Purchase Detail line and ASN Detail line do not match in WMS Cloud.
- D. ASN data is past the shipping date.
- E. A Purchase Order that is referenced on the ASN doesn't exist in WMS Cloud.
Answer: A,B,C
NEW QUESTION 38
In which two ways can you execute the detail cycle count of LPN Detail by sku scan? (Choose two.)
- A. using "Resv Nbr Cnt" screen and with screen parameter content-count set to "sku-scan"
- B. using "Cycle Cnt" screen with screen parameter content-count set to "sku-scan"
- C. using "Cycle count for LPN deffered/immediate updates" with screen parameter sku scan mode set to "By Sku Scan"
- D. using "Cycle Cnt" screen with screen parameter content-count set to "Null"
Answer: C,D
NEW QUESTION 39
Your client wants to create an Advanced Shipment Notification (ASN) automatically after a Purchase Order (PO) is created in the system.
What step should they perform?
- A. The user needs to go to the Purchase Order Screen UI and select the "Create IB Shipment" check box
- B. When interfacing the shipment, the PO number should be specified
- C. Update the Company Parameter CREATE_ASN_FOR_EACH_PO to Yes on the Company Parameter UI screen
- D. When interfacing the PO, the "create_asn" check box needs to be selected every time
Answer: C
NEW QUESTION 40
You are monitoring the progress of the picking wave and notice that a rush order needs to be picked immediately.
Which two steps should you take to complete the Picking Tasks as soon as possible? (Choose two.)
- A. Select the tasks in the Tasks UI, and confirm the pick in the UI.
- B. Select the tasks and in the Tasks UI, select Change Task Priority to give the task a higher priority.
- C. Manually take the inventory from the location to the shipping area.
- D. Select the tasks in the Tasks UI, select Assign user, and let the picker know that he/she is to select the
- E. Select the tasks in the Tasks UI, select Cancel Task, and re-run the wave.
Answer: B,D
Explanation:
tasks for immediate pick.
NEW QUESTION 41
Your client wants to do flow-through allocations. Which two types of packing transactions achieve this flow? (Choose two.)
- A. PackNC
- B. Packlpn
- C. Distribution
- D. Pick Cart
Answer: A,C
NEW QUESTION 42
Select the two routing configurations that are used to specify routes for outbound loads. (Choose two.)
- A. the company parameter PACKING_ROUTING_MODE
- B. the Routing Mode on the Wave Template
- C. the Routing Mode on the Carrier UI Screen
- D. the Routing_Mode parameter on the Loading RF Transaction
Answer: A,B
NEW QUESTION 43
Your customer wants to use Advance Shipment Notification (ASN) created in WMS Cloud System for receiving without RF gun and expects ASN to be verified.
What are the two steps to complete the ASN receiving and verification transaction? (Choose two.)
- A. Create an ASN from the IB license plate screen
- B. Create a Blind IB plate number and cartonize before receiving
- C. Assign a dock door to IB shipment
- D. Create a Blind IB plate number and palletize after receiving
- E. Verify the IB shipment
Answer: D,E
NEW QUESTION 44
......
Focus on 1z0-1045-22 All-in-One Exam Guide For Quick Preparation: https://pass4sure.test4cram.com/1z0-1045-22_real-exam-dumps.html